PZT-4 Piezo Ceramic Disc 28*0.7mm 3mhz For Dedical Device Ultrasonic Ceramic Transducer

PZT-4 PIEZO ceramic disc 28*0.7mm 3mhz use for Dedical device ultrasonic ceramic transducer

Many ceramic disc size specfication can make,,,

steel head professional processing,

• A variety of ultrasonic product processing

..

• Specializing in this field for 20 years.Please connect us get more details:

Email:cherryliu@taimihk.com

Mobile/whatsApp:+86 13538467125

The principle of the piezoelectric ceramic transducer is that when pressure or tension is applied to the ceramic chip, charges of opposite polarity will be generated at the two ends of the ceramic chip and a current is generated through the circuit. This effect is called the piezoelectric effect. Therefore, in the design of ultrasonic transducers, various factors should be considered, such as acoustic impedance, frequency response, impedance matching, acoustic structure, vibration mode and conversion material, and how to design and coordinate these factors to achieve electro-acoustic conversion. best value. As a kind of energy transmission network, piezoelectric ceramic transducer has the problem of energy conversion efficiency.

The conversion efficiency is related to the selection of the transducer material, the form of vibration, the structure of the mechanical vibration system (including the support mechanism) and the operating frequency. Therefore, the problem of the ultrasonic transmitter is solved. There are two materials for piezoelectric ceramic transducers: magnetostrictive metal and piezoelectric ceramics. Piezoelectric ceramic transducer is an electronic ceramic material with piezoelectric characteristics. The main difference from a typical piezoelectric quartz crystal that does not contain ferroelectric components is that the main components of the crystal phase are all ferroelectric crystal grains. Ceramics are polycrystalline aggregates with randomly oriented grains, so the spontaneous polarization vector of each ferroelectric grain is also disoriented.

If a transducer made of this piezoelectric ceramic is put into water, then under the action of sound waves, charges will be induced at both ends of the transducer, which is a sound wave receiver. In addition, the piezoelectric effect is reversible. If an alternating electric field is applied to a piezoelectric ceramic sheet, the ceramic sheet will become thinner and thicker from time to time, and it will vibrate and emit sound waves. In order to make the ceramic exhibit macroscopic piezoelectric properties, the piezoelectric ceramic must be polarized in a strong DC electric field after firing, and the end face is subjected to multiple electrodes, so that the polarization vector of the original disordered orientation is preferentially oriented in the direction of the electric field. , The piezoelectric ceramic after polarization treatment will maintain a certain macroscopic residual polarization strength, so that the ceramic has a certain pressure.

• TAIMI PZT ultrasonic sensor
• Customized piezoelectric ceramic element, diameter is 10mm
• Type: piezoelectric ceramic
• Use: for ultrasonic equipment
• Clear sound/high sound pressure
• Extremely thin and light
• Low power consumption
• No EMI/RFI

♥ if don't find what informations you need. Pls check connect us to get more.

We are always here to support you

Certificates